Descaling crawler type automatic sand blasting machine
Descaling sandblasti,Deburring and sandblasting machine
Environmental protection crawler type automatic sand blasting machine for surface oxidation treatment of batch small hardware die castings
It is suitable for large and medium-sized surface rust removal, sandblasting strengthening, surface oxide scale removal, rust removal and degreasing of hardware parts of various
materials. The cleaning workpieces must be castings, heat treatment parts and other hardware parts with single weight less than 10kg that are not afraid of collision.
Technical parameters:
Model: bx2312-6a crawler type automatic sand blasting machine
Overall dimension of equipment: 2300mm long, 1200mm wide and 3300mm high
Internal dimension of equipment working room: width 750mm, roller diameter 600mm
Processing capacity: each processing capacity: below 50kg (single piece no more than 3kg)
Crawler motor: 380V / 50Hz, 0.75kw
Dust removal fan: 380V / 50Hz, 2.2kw
Gun frame motor: 380V / 50Hz, 0.3kw
Power supply: 380V
Lighting: 15W
Total power: < 3.5kw
Dust removal method: pulse filter element dedusting
Filter element specification / Quantity: φ 325 * 660l / 4 pieces
Number of boron carbide nozzles
Shell: made of 6mm cold rolled steel plate by welding
Air pressure: 7bar (kg / cm2) (the air compressor is the equipment of the demander) the air compressor is 4 cubic meters
Total weight: 1.56 tons left
Purpose of crawler sandblasting machine:
It is suitable for all kinds of small and medium-sized metal castings, heavy metal castings, heavy metal castings, etc
Light effect or finishing effect
It is suitable for a large number of small workpieces, such as drills, screwdrivers, screws, pinions, sleeves, aluminum die-casting products, bakelite products, plastic products,
powder metallurgy products, zinc aluminum die-casting products, bakelite products, plastic products, screws, gears, acrylic, sleeves, spanners, scissors and other small parts.
Processing mode
When sandblasting, the worker will load the workpiece into the track of the processing cabin, then close the sandblasting chamber, set the time of the sandblasting machine, start
the automatic rotation of the crawler, and at the same time, the spray gun will automatically stop the sand blasting processing. After the automatic sand blasting of the workpiece
is completed, the spraying gun will automatically stop the sand blasting processing. After the crawler stops rotating automatically, the operator will open the sandblasting
chamber 6 and start the track reverse button The finished workpiece is automatically pushed out of the sandblasting chamber. After the processed workpiece is unloaded, repeat the
above operation.
The sand blasting machine adopts suction type sand blasting, that is, the abrasive in the cyclone separator is sucked into the spray gun through the sandblasting pipe by using the
ejecting effect generated by the negative pressure formed by the compressed air in the cavity of the spray gun, and then the abrasive in the cyclone separator is ejected from the
nozzle with high speed along with the compressed air to realize the sandblasting treatment on the surface of the parts.
The ejected Abrasives pass through the cyclone separator. Due to the centrifugal force, the good abrasives and the unusable tiny dust are separated automatically. Then, the good
Abrasives fall into the storage box under the cyclone separator for recycling. The dust is discharged from the top of the cyclone separator and is separated by the dust bag in the
dust removal box, so as to achieve the separation of dust and air.
Features of deburring automatic sandblasting machine:
1. The machine uses the roller to drive the crawler to make the workpiece turn over and roll in the processing bin, and the spray gun automatically swings to sandblast the workpiece.
2. Swing type sandblasting is adopted in the gun rack, which can make the workpiece sandblasted more evenly. The gun rack speed can be adjusted according to the actual demand by frequency conversion.
3. The wear-resistant crawler with strip shape can make the workpiece easier to turn over, and the track can be turned forward and backward, which is more conducive to sandblasting operation;
4. The cyclone separation closed operation mode is designed by introducing Japanese technology. The sand material is automatically recycled and recycled, and the sand material between 150 mm and 320 mm is finely separated to improve the utilization rate of sand material and reduce the production cost.
5. The machine shell adopts powder spraying and paint baking, which can prevent rust and is durable.
6. Suitable sand materials: ceramic sand, glass fiber, alumina, gold steel sand, glass bead, walnut sand, resin sand, fine steel shot, steel sand, stainless steel ball, aluminum ball, etc.
7. There is no need for foundation installation and occupies a small space.
8. It is very suitable for automatic sandblasting operation which is not afraid of collision with small parts, and can add a lot of work each time.
9. During the operation, it is only necessary to put the workpiece into the ring quantitatively and set the sandblasting time to start the sandblasting operation. The operation and maintenance are easy to learn.
10. Press the reversing button of the ring belt to discharge the material automatically, which is very convenient and labor-saving.
11. The automatic sand blasting operation can be started only by loading the work into the processing bin quantitatively and setting the sandblasting time. The operation and maintenance are easy to learn;
12. Press the reverse button on the electric box to discharge automatically, which is very convenient and labor-saving.
13. The rotation speed of the ring belt can be adjusted and controlled by the frequency converter according to the working needs.
14. The cleaning air gun controlled by the idle timer can set the idle blowing time to clean the workpiece and make the sand recovery more thorough.
